In terms of 'must do mods' on the DRZ400, the list goes:

1. case savers
2. bash plate
3. barkbusters

and purely for aesthetics:

4. tail tidy

Having done the first three items when I picked up the bike a year ago I've been putting off doing the tail tidy as there always seemed to be something else to spend money on. But having put up with everyone I ride with telling me I 'really have to do something about the arse end of the bike...' for a long time I decided to get to it and replace it.

The first challenge was finding a suitable unit. The ones offered by B&B and R&G appear top notch in terms of quality but pretty expensive for what they are. Asking around on Facebook quickly revealed that the Savage tail tidies listed on eBay for around $40 are more that up to the task at a fraction of the price. nice.

So I ordered one up from eBay along with an A4 piece of 4.5mm polycarbonate. One of the fellas who'd chimed in on the Facebook post had suggested making a backing plate for the licence plate as in his words 'it stops the number plate becoming a meat slicer' and also reduces the risk of the number plate cracking (which seems to be a common problem when the bike gets dropped).

While I was waiting for the unit to turn up in the post I got to designing the backing plate template and figuring out all the other bits I'd need to make the project run smoothly. One thing that came up in my research was that the police are pretty hot on roadworthy dual sport motorcycles having a reflector on the back of the bike:

All motorcycles must have at least 1 rear-facing red reflector which is visible from either side of the rear of the motorcycle.

https://www.tmr.qld.gov.au/Safety/Vehicle-standards-and-modifications/Vehicle-standards/Motorcycle-standards#reflector

if they pull you over cos they're in a bad mood, sure as eggs are eggs you'll pick up a fine. Interestingly, when I took the tail tidy into the local police station the cop on the desk said he wouldn't pull me up on it! But then I found out that traffic cops are a different department to bobbies in squad cars and decided that it wasn't worth taking the risk... The good news is that the factory fender ships with great bolt on reflector so my template incorporated the original to keep everything nice and legal.

And to doubly make sure the cops would be happy I also picked up these round screw in reflectors that I'd use in place of bolts - safety first and all that.

The template can be downloaded here: QLD Motorcycle Number Plate Template PDF. Please note: it seems that each state has a slightly different set of dimensions!

Which left the last challenge being how to wire in the back brake. I had no joy finding a 3 wire connector that matched the one on the bike and after a lot of asking around the general consensus was to cut the current wires close to the current brake light and then splice/solder the wire to the ones on the new unit. After some hunting around I found these excellent 'solder splice heatshrink tubes' at JayCar. What a genius idea: the middle of the heatshrink tube has a small band of solder so all you do is slide the tubing onto one of the wires, merge the wire strands as you normally would when joining wires with solder, slide the tubing back over both wires aligning the solder section with the middle of the joined wires and heat with a butane or electric coil lighter (or a heat gun if you have one, long and short being 'heat' not 'flame' as you don't want to burn anything). The heat melts the solder giving a great join quality and meanwhile the shrinktube contracts around the wire giving a waterproof seal. Wrap in electrical tape and it's good to go.

Once the unit arrived the first thing I discovered is that the slots don't line up with the holes on an Australian number plate - which isn't a big deal but if i was going to fix the plate to my polycarbonate backing plate I was going to have to perform some surgery. After a few experiments I decided to cut the ends off either side of the tail tidy and drill new holes in the plate to mount it.

I checked with the legality of this and found that:

Drilling holes in a number plate is only permitted:

• to enable it to be attached to a vehicle
• if the holes do not interfere with the appearance of any characters on the plate
• if plates are not altered in any way so as to damage or deface the plate.

https://www.qld.gov.au/transport/registration/numberplate/replace-change

The next challenge was figuring out which wires joined to which. The wire colours on the new unit don't match so it was a case of trial and error to figure it out: twist the wires together, turn the bike on, pull the brake lever and check to see if the light gets brighter - it turned out the combination was:

• grey to red
• black to black
• white to green

With the wires joined, the number plate and reflector fixed onto the backing plate and the indicators added it was a simple case of removing the old unit and bolting the new one in place using the original screws. The cables were routed around the subframe, the fender went back on and it was job done.

All in, it was probably $65 including bolts etc from Bunnings - we'll worth it as I think you'll agree, it looks far better than the original! 

Only a short ride, 3 hours in the forest up at Mnt Mee with Wayne, Ronnie, Chris and Guy but that was perfect for me as to be honest, I kinda felt like I was starting over... They reckon it takes a couple of weeks to 'forget' how to ride and a couple of hours to get back into the rhythm.

So I went for it! It was a little shaky at first and as it was very dry and dusty I took it slow and steady and had a great time.

Highlights of the day we're spotting a huge snake (well, huge to me - apparently it was a baby!) and making it up 'A Break' in one go without hitting the deck.

All in all a perfect blip in the forest - it's good to be back ;)

As ever, I had the excellent Relive app running on the phone which captured the entire route - if you've not tried it, it's GPS tracking app that compiles any media you shot along the way into a video. Well worth a go!

Today was no exception! Apart from smashing through some great puddles and getting more confident on sand the highlight of the day was 'The Clergyman's Track'. I've no idea how Matt found his way back here, I'm guessing he had it plugged into the GPS but after winding through the forest we found ourselves at a fairly innocent looking right turn into the bush...

Which is where the fun and games began. This tiny winding track was excellent: at some points it was just wide enough to get the bike through, then you were winding through trees, then puddles, then getting around fallen trees... All slow work but so much fun.

And the reason for the track name? Well Matt and Luke bumped into a couple of riders some weeks back who showed them the track and they turned out to be ministers!

The other thing I've stated to use is the excellent Relive app on my phone. Set the app recording at the beginning of the ride and it'll follow your every move. Take some snaps along the way or shoot some video and when you're done, click finish and it'll build you a video along with the media you shot along the way and the stats of your ride (speed, elevation etc).

Pretty impressive stuff! It even allows you to export the data to a KLM file so you can load it into a GPS device or Google Maps and you can also explore the root on Google Earth via the website. Well worth checking out.

It was a bit of a slow start - there were 6 riders today which can sometimes take a bit of getting going but we headed off around 9ish. The moment we transferred from the road to dirt I remembered I'd not aired down my tires so after a quick hop off bike to let some air out we disappeared into the forest.

Which is where things started getting interesting... Wyane's bike (anther DRZ400) started playing up, cutting out and being a pain to start. Then Ian disappeared down a hole and hit the dirt and Wayne, who was following behind, grabbed a handful of brake and also ended up eating the dirt, smashing his phone, left barkbuster and rear left indicator in the process...

So we set off again but it quickly became apparent that things really weren't going well: Wayne's bike eventually died and refused to start and it appeared that something wasn't good with Ian's wrist as it had started to swell and was pretty painful.

Eventually Matt towed Wayne back to the bitchumen and we had a bit of a conflab about what to do. In the end the broken DR was left at a random house we found. Ian rode out on the back of Steph's bike and Wayne drove Ian's Yamaha YZ450 back to the car park with the plan being to hire a trailer and come back to pick up the bike!

It was only 11am and we were down to 3 riders - Luke, Matt and myself. To be honest, I was all for writing it off and heading home but luckily Matt and Luke's resolve was better than mine and off we went again...

...and I'm so glad we did! The next 3 or so hours were fantastic fun, the highlight being Luke's shortcut: an completely overgrown track with fallen logs and other obstacles to get over, loads of fun.

The other thing I'd brought along on the ride was my GoPro. It's been sat in the camera bag since returning to Australia so I figured it was time to dust it off and give it a go. Although I shot about 20gb of footage only 5 minutes or so were usable! There's clearly a learning curve to shooting interesting footage on a dirt bike... I leant some lessons though, namely to wear the camera higher on my chest, point it up and only turn it on when something interesting is happening!

It's available as a Nuget package or via the Umbraco backoffice installer:

https://github.com/KOBENDigital/bento.editor

https://our.umbraco.com/packages/backoffice-extensions/bento-editor/

Very proud to have been involved in it's development - the editor takes advantage of all the infinite editing goodness in v8, solves the problem of element based and reusable content blocks, offers multiple layouts and cell based grid designs in a single block... and its blisteringly fast too.

Give it an install and let us know what you think?